Bertech ESD High Temperature Rubber Mat Roll 2.5′ Wide x 10′ Long x 0.08″ Thick, Blue

#ad
Bertech 2059T-2.5x10B #ad - Excellent resistance to hot solders, soldering irons, and most solvents. Made of two Layer Rubber Material. Rohs Compliant. This mat is very light compared to our single layer and three layer mats. Surface resistivity: top layer: 2 x 10e6 - 10e8 ohms, Bottom Layer: 8 x 10e6 - 10e8 ohms. Rohs Compliant. The top layer is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer.

008 inches Thick. Esd high temperature mats offer excellent resistance to oil, grease, and most common solvents. Bertech esd high Temperature Mat Rolls are. 08 inches thick and have two layers.

#ad



DESCO 09864 PACK OF 2 UNIVERSAL SNAP MOUNTING KIT

#ad
Desco #ad - Price for: each kit contents: 10mm stud, 10mm socket, long & short screws & esd Common Point Ground Symbol Label For Use With: Antistatic Mats RoHS Compliant: NA 09864 pack of 2 desco. Socket, long & short screws & esd common Point Ground Symbol Label For Use With: Antistatic Mats. Rohs compliant: NA. Desco 09864 pack of 2 universal snap mounting kit.

Each kit contents: 10mm Stud, 10mm.

#ad



Bertech ESD Low Profile Grounding Cord, with 10mm Male Snap, 1 meg Resister and a 15' Cord

#ad
Bertech FGC151M #ad - Desco 09864 pack of 2 universal snap mounting kit. They are made from rugged vinyl and come standard with 15-foot cords. A low profile point ground has a low profile design and comes with 10mm male or female snaps. Used to prevent electrostatic discharge by safely grounding a person working with electronic equipment or at an electronic assembly facility.

Designed for an electronic assembly where static charge is a concern. It is made from rugged vinyl and come standard with 15' cords. Meets or exceeds requirements of ansi ESD-S2020 and ansi/esd S-6. 1. Socket, long & short screws & esd common Point Ground Symbol Label For Use With: Antistatic Mats. Rohs compliant: NA.

Bertech ESD Low Profile Grounding Cord, with 10mm Male Snap, 1 meg Resister and a 15' Cord #ad - 09864 pack of 2 desco. Each kit contents: 10mm Stud, 10mm. Bertech esd low profile grounding Cords have a low profile design and comes with a 10mm male snap.

#ad



Yohii 3Pcs 1.8M Cable L Shaped Anti Static Wrist Strap Belt Ground Connector Wrist Strap Ground Cord

#ad
Yohii #ad - Desco 09864 pack of 2 universal snap mounting kit. Specially designed for use at workstations and table mats, provides a common grounding point for one or two wrist straps. Packaging includes: 3 x eSD grounding cord wrist strap ground cord with 1. 8m length cord. Used to prevent electrostatic discharge by safely grounding a person working with electronic equipment or at an electronic assembly facility.

It is made from rugged vinyl and come standard with 15' cords. But if not, we will provide you with a 100% refund, because we hope to provide you with the most satisfactory service. Mounts under the front eade of a work station to save work space. The color of the product may vary slightly due to different displays.

Yohii 3Pcs 1.8M Cable L Shaped Anti Static Wrist Strap Belt Ground Connector Wrist Strap Ground Cord #ad - 09864 pack of 2 desco. Provides a common grounding point for one or two wrist straps, as well as table mats and runners. Easy to install: ring terminal at end of ground cord allows easy attachment to electrical ground. Note: it is designed to mount under the front edge of a work station. A low profile point ground has a low profile design and comes with 10mm male or female snaps.

Rohs compliant: NA.

#ad



DES - 09838 - StaticTek Banana Jack Outlet Plug Adapter | Universal Ground 3 Prong Outlet Earth Connection | ESD Control | Black Light Weight Unbreakable Plastic | 1 Piece | STI

#ad
Transforming Technologies #ad - Packaging includes: 3 x eSD grounding cord wrist strap ground cord with 1. 8m length cord. Each kit contents: 10mm Stud, 10mm. A low profile point ground has a low profile design and comes with 10mm male or female snaps. But if not, we will provide you with a 100% refund, because we hope to provide you with the most satisfactory service.

Material: statictek plug prongs are made of unbreakable plastic. Because of the plastic material, It is lightweight and easy to carry anywhere. Easy to use: providing stability in connection and it will not accidentally disconnect. Desco 09864 pack of 2 universal snap mounting kit. Product design can make for better cable management in some situations, especially in tight spaces.

DES - 09838 - StaticTek Banana Jack Outlet Plug Adapter | Universal Ground 3 Prong Outlet Earth Connection | ESD Control | Black Light Weight Unbreakable Plastic | 1 Piece | STI #ad - Perfect for earthing/grounding: this product is very useful to work on computers or ESD sensitive devices. Used for earth connections to any static dissipative or conductive objects. It is made from rugged vinyl and come standard with 15' cords. The wrist strap ground allows up to two operators to ground their wrist straps using standard banana jacks.

Risk-free 100% money back guarantee: we believe that you will love this product as much as we do. Perfect for many applications of earthing, wrist strap, work bench, grounding and provides the electro static control you need.

#ad



ACL Staticide 8091 Common Point Ground Cord, 10' Cord

#ad
ACL Staticide #ad - Grounding hardware is available separately. Scope of application: specially designed for use at workstations and table mats. Designed for an electronic assembly where static charge is a concern. The acl staticide common point ground cord is a 10 mm dual port. Packaging includes: 3 x eSD grounding cord wrist strap ground cord with 1.

8m length cord. Rohs compliant: NA. Its 10 feet cord is used to connect wrist straps to ground. Meets or exceeds requirements of ansi ESD-S2020 and ansi/esd S-6. 1. Product design can make for better cable management in some situations, especially in tight spaces. Perfect for earthing/grounding: this product is very useful to work on computers or ESD sensitive devices.

ACL Staticide 8091 Common Point Ground Cord, 10' Cord #ad - Move to outlets on different work benches or a different room as needed. Desco 09864 pack of 2 universal snap mounting kit. Socket, long & short screws & esd common Point Ground Symbol Label For Use With: Antistatic Mats. Provides a common grounding point for one or two wrist straps, as well as table mats and runners.

Easy to install: ring terminal at end of ground cord allows easy attachment to electrical ground. Note: it is designed to mount under the front edge of a work station.

#ad



Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber

#ad
American Hakko Products, Inc FA400-04 #ad - Used to prevent electrostatic discharge by safely grounding a person working with electronic equipment or at an electronic assembly facility. Esd-safe by design and is made of ESD-safe materials. Meets or exceeds requirements of ansi ESD-S2020 and ansi/esd S-6. 1. Ideal for earth connections to any static dissipative or conductive objects.

Activated carbon filter contains over 8g of highly activated carbon. The unit can be used in a vertical standing up position or low-profile position laying down. When used in the low-profile laying down position, efficiency and air flow is increased by approximately 2. 6 times. Packaging includes: 3 x eSD grounding cord wrist strap ground cord with 1.

Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber #ad - 8m length cord. Breathe easy with the Hakko FA-400 bench top smoke absorber. Because of the plastic material, It is lightweight and easy to carry anywhere. Easy to use: providing stability in connection and it will not accidentally disconnect. If you want to remove the device then just pull the connection out at the body.

Grounding hardware is available separately. So, just click on the Add to Cart button and enjoy a risk-free purchase.

#ad



Universal Snap Kit and 15' 1 Meg Male Low Profile Ground Cord - Alphastat Table Mat Grounding Kit

#ad
Static Care #ad - 09864 pack of 2 desco. Grounding hardware is available separately. Each kit contents: 10mm Stud, 10mm. Quick and easy filter replacement. Provides a common grounding point for one or two wrist straps, as well as table mats and runners. Easy to install: ring terminal at end of ground cord allows easy attachment to electrical ground.

Note: it is designed to mount under the front edge of a work station. Table mat ground: a complete kit to install and ground ESD and Anti-Static table mats according to ANSI ESD S2020 Thick or thin mats: the kit includes a universal snap kit that can install a 10mm snap or stud into materials up to 0375" thick mats.

Universal Snap Kit and 15' 1 Meg Male Low Profile Ground Cord - Alphastat Table Mat Grounding Kit #ad - A buried 1 meg resistor is included for safety. Esd standards require 1 ground point per mat or every 10ft of ESD matting. But if not, we will provide you with a 100% refund, because we hope to provide you with the most satisfactory service. Material: statictek plug prongs are made of unbreakable plastic. Comes with a low profile common Point Ground Cord that snaps to the mat and provides two banana jack recepticals to ground two operators working at the station.

Perfect for many applications of earthing, wrist strap, work bench, grounding and provides the electro static control you need.

#ad



Bertech Rubber ESD Soldering Mat Roll, 2' Wide x 10' Long, Blue

#ad
Bertech 2059S-2x10B #ad - Applications: aerospace assembly, Hospitals, Electronic Repairs, Fiber Optics, Electronic Manufacturing, Medical Assembly, and Soldering. Meets or exceeds requirements of ansi ESD-S2020 and ansi/esd S-6. 1. Each kit contents: 10mm Stud, 10mm. Table mat ground: a complete kit to install and ground ESD and Anti-Static table mats according to ANSI ESD S2020

Thick or thin mats: the kit includes a universal snap kit that can install a 10mm snap or stud into materials up to 0375" thick mats. A low profile point ground has a low profile design and comes with 10mm male or female snaps. Esd-safe by design and is made of ESD-safe materials. Quick and easy filter replacement.

Bertech Rubber ESD Soldering Mat Roll, 2' Wide x 10' Long, Blue #ad - These mats are heat and solder resistant, will not delaminate, and are easy to clean. The wrist strap ground allows up to two operators to ground their wrist straps using standard banana jacks. Risk-free 100% money back guarantee: we believe that you will love this product as much as we do. Bertech esd soldering mats have two layers: The top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer.

Desco 09864 pack of 2 universal snap mounting kit. It is very light compared to our single layer and three layer mats.

#ad



Thermaltronics BC-10 Solder Tip Cleaning Wire

#ad
Thermaltronics BC-10 #ad - Designed for an electronic assembly where static charge is a concern. Solder tip cleaning wire interchangeable for metcal ac-bp, hakko 599B, 599-029. For use on all soldering tips. Add this to your mobile ground kit for working at different locations. Long service life: connect ground carts, table or floor mat with universal banana plugs.

Table mat ground: a complete kit to install and ground ESD and Anti-Static table mats according to ANSI ESD S2020 Thick or thin mats: the kit includes a universal snap kit that can install a 10mm snap or stud into materials up to 0375" thick mats. Quick and easy filter replacement. Because of the plastic material, It is lightweight and easy to carry anywhere.

Thermaltronics BC-10 Solder Tip Cleaning Wire #ad - Easy to use: providing stability in connection and it will not accidentally disconnect. Comes with 10 feet cord. Meets or exceeds requirements of ansi ESD-S2020 and ansi/esd S-6. 1. Low profile position provides approximately 2-1/2 times the airflow and efficiency. Suitable for semiconductor/hard disk drive industry, and other static controlled environments.

#ad



Hakko CHP Micro Cutter, Clean Cut, 16 AWG set of 5

#ad
hakko CHP-170 #ad - Can be operated standing up or laying down in a low-profile position. The ground cord connects to that snap and the opposite end is connected to the center screw of an outlet. Activated carbon filter contains over 8g of highly activated carbon. Move to outlets on different work benches or a different room as needed.

12 grams each/ 10 per pack. Low profile position provides approximately 2-1/2 times the airflow and efficiency. A low profile point ground has a low profile design and comes with 10mm male or female snaps. Comes with a low profile common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station.

Hakko CHP Micro Cutter, Clean Cut, 16 AWG set of 5 #ad - Easy installation: the snap kit is installed into the mat with Philips head screw driver. Excellent general use cutter. 5 piece package. The wrist strap ground allows up to two operators to ground their wrist straps using standard banana jacks. Risk-free 100% money back guarantee: we believe that you will love this product as much as we do.

Used to prevent electrostatic discharge by safely grounding a person working with electronic equipment or at an electronic assembly facility. Ergonomic handle for comfort.

#ad