As an Amazon Associate I earn from qualifying purchases.

High performance - the 4 port sata controller based on Marvell 88SE9215 chip, more stable and wider compatible. Efficient - you could add four 6gbps/s sata 3. 0 devices to your computer with the PCIe SATA card and 4 SATA cables.

Pci-e interface x1 uses immersed gold technology with thickened gold-plated gold fingers, and is compatible with PCI-e X1, easy data transmission, better contact, X4, X8, effectively reduce packet loss rate, X16 slots.


This product supports windows xp/2003/vista/win7/win8/win10 32/64 bit operating system.
You can choose ahci, data disk, IDE, three modes Can choose freely. The tail is flush design, the probability of blocking the graphics card fan is smaller. The rear sata3. 0 interface, which is more suitable for use in narrow spaces, we newly upgraded and expanded 4 rear SATA3. 0 interfaces, and 2u can also be better fixed; the rear wiring will not cross the graphics card. This product is equipped with 4u, which can support large and small cases.

The card comes with an optional raid utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports. Add four independent sata-i ports to your pci equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.

With hot swap and hot plug capabilities, and power management functions;. Applicable slot: mini PCI-E mSATA is not supported. Interface: 2 * sata3. 0 interface. Supports native command queue NEQ.

Compatible with windows xp /2003 / 8 / 10 / maC / 7 / NAS / Linux OS. For all pcs - with a low profile bracket and 4 SATA Cable,compatible with 99% size chassis on the market. You could make the system to boot from this sata controller but non RAID.

2 ssd size 2230, 2242, 2260, 2280, 22110mm. With advanced heat sink solution, PCB 24 X 5 copper hole effective ventilation heat dissipation, Including 2 heat sinks. Converts one m. 2 nvme ssd m key interface to pcie 3.

Add four independent sata-i ports to your pci equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.
1. BEYIMEI
#ad
PCI-E to SATA Expansion Card,6Gbps PCI-E 2X 4X 8X 16X SATA 3.0 Controller Card for Windows10/8/7/XP/Vista/Linux,Support SSD and HDD, BEYIMEI PCIe SATA Card 2 Ports
#adBEYIMEI #ad - 2 port sata 3. 0support ahci 1. 0 mode and ide mode, bus interface: PCI-Express x1 slot, expansion interface: 2 SATA 3. 0 interfaces. Support hot swap, plug and play, easy to use. Comply with serial ata 3. 0 specification, conform to pci-express v2.More information #ad
0 specification, SATA1. 0, backward compatible with SATA2. 0, and backward compatible with PCI-Express v1. 0 Support system: win10 / win8 / win7 / winxp /vista/linux. System requirements: there is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16. Support 6. 0 gbps, 3. 0 gbps and 1. 5 gbps of communication speed.Brand | BEYIMEI #ad |
Manufacturer | BEYIMEI #ad |
Part Number | BEYIMEI |
Model | . |
More information #ad
2. JESOT
#ad
6 Gbps SATA 3.0 Controller PCI Express Expression Card with Low Profile Bracket Support 4 SATA 3.0 Devices, SATA Card 4 Port with 4 SATA Cables
#adJESOT #ad - Fit for pcie x1/ x4/ x8/ X16 slot. Support system - the sata expansion card supports windows xp/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Port multiplier FIS-based and Command-based switching supported.High performance - the 4 port sata controller based on Marvell 88SE9215 chip, more stable and wider compatible. Efficient - you could add four 6gbps/s sata 3. 0 devices to your computer with the PCIe SATA card and 4 SATA cables.
More information #ad
Support install Windows OS from Win10 PE. For all pcs - our pcie to sata iii 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Please note - you could make the system to boot from this sata card but non RAID. Backward compatible to 1. 5 gbps/s and 3 Gbps/s. But if your motherboard has raid function, you could make a RAID with this SATA card.Brand | JESOT #ad |
Manufacturer | JESOT #ad |
Part Number | SATA CARD-01 |
More information #ad
3. Trotwei Blue
#ad
SATA PCIe Card,6Gbps PCI Express x1 to SATA 3.0 Controller Card for Windows XP/7/8/10 SSD HDD, SATA Expansion Card 10 Ports
#adTrotwei Blue #ad - Supports winxp/2003/vista/win7/Win8/Win1032/64bit operating systems. Note: only 2 disks are supported without a driver, and 10 disks can be supported after the driver is installed, and raid is not supported.Pci-e interface x1 uses immersed gold technology with thickened gold-plated gold fingers, and is compatible with PCI-e X1, easy data transmission, better contact, X4, X8, effectively reduce packet loss rate, X16 slots.
More information #ad
This expansion card can support connecting 10 large- capacity SATA storage devices to use at the same time, and the SATA 3. 0 interface speed can reach up to 6Gbps. Use asmedia chip to improve compatibility and stability, while enlarging the heat sink, the heat dissipation effect is better.Brand | Trotwei Blue #ad |
Manufacturer | SSU #ad |
Warranty | Amazon.com Return Policy:You may return any new computer purchased from Amazon.com that is "dead on arrival," arrives in damaged condition, or is still in unopened boxes, for a full refund within 30 days of purchase. Amazon.com reserves the right to test "dead on arrival" returns and impose a customer fee equal to 15 percent of the product sales price if the customer misrepresents the condition of the product. Any returned computer that is damaged through customer misuse, is missing parts, or is in unsellable condition due to customer tampering will result in the customer being charged a higher restocking fee based on the condition of the product. Amazon.com will not accept returns of any desktop or notebook computer more than 30 days after you receive the shipment. New, used, and refurbished products purchased from Marketplace vendors are subject to the returns policy of the individual vendor. |
More information #ad
4. MHQJRH
#ad
PCI-E to SATA 3.0 Disk Array Card,with Small Bracket and 2 SATA Cable Support SSD and HDD, 2-Port PCIe to SATA III 6GB / s Built-in Adapter Converter, MHQJRH PCI Express SATA 3.0 Controller Card
#adMHQJRH #ad - Support ide or AHCI programming interface. Connect 2 mass storage devices at the same time. Compliant with serial sata version 3. 0; compliant with PCI-E 2. 0 specification. Built in 2 sata3.More information #ad
0 interfaces, supports sata rev 3. 0 transfer speeds up to 6. 0gbps and backwards compatible with SATA I/II at 1. 5/3. 0gbps. Compatible with windows xp/server 2003/Vista/7/832/64 bit/10/MAC/Linux OS. Pcie to sata 3. 0 2 port expansion card with a low profile Bracket and 2 SATA Cable.Brand | MHQJRH #ad |
Manufacturer | MHQJRH #ad |
Height | 1.2 Inches |
Length | 7.3 Inches |
Width | 4.3 Inches |
Part Number | 8541586953 |
Model | 8541586953 |
More information #ad
5. PUSOKEI
#ad
SATA 3.0 4 Port PCIe Controller Card,PCI Express to SATA 3.0 6Gbps with 2U 4U Fixed Brackets,Plug and Play PCI E Cards,SATA 3.0 Expansion Card
#adPUSOKEI #ad - A large heat sink is added on the surface of the adapter. The wiring is more convenient and the chassis can be used in all sizes. The heat dissipation effect is better. Adopting heavy gold technology to thicken the gold-plated gold fingers, facilitating data transmission, 2U dual fixing brackets, with better contact, which can be easily installed in the PCI-EXPRESS slot of the chassis, and effectively reducing the packet loss rate.This product supports windows xp/2003/vista/win7/win8/win10 32/64 bit operating system.
More information #ad
The pci-e to sata adapter card of this product has 4 sata3. 0 interfaces and a rear four-port design. The four-layer circuit board is used with an isolation layer in the middle, which has stronger anti-interference ability. You can choose ahci, data disk, IDE, three modes Can choose freely. The tail is flush design, the probability of blocking the graphics card fan is smaller. The rear sata3. 0 interface, which is more suitable for use in narrow spaces, we newly upgraded and expanded 4 rear SATA3. 0 interfaces, and 2u can also be better fixed; the rear wiring will not cross the graphics card. This product is equipped with 4u, which can support large and small cases.
Brand | PUSOKEI #ad |
Manufacturer | PUSOKEI #ad |
Height | 0.87 Inches |
Length | 4.72 Inches |
Weight | 0.2 Pounds |
Width | 3.15 Inches |
Part Number | Tangxigkqrpy2hxn |
More information #ad
6. GODSHARK
#ad
PCI to SATA Adapter Converter for Desktop PC Support HDD SSD, GODSHARK 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables
#adGODSHARK #ad - Plug the sata raid pci card into the pci slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length.The card comes with an optional raid utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports. Add four independent sata-i ports to your pci equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.
More information #ad
Note it is pci card, NOT PCIE card. Sil3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ. You can have one raid 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set.Brand | GODSHARK #ad |
Manufacturer | GODSHARK #ad |
Part Number | PTOS-4P |
More information #ad
7. cablecc
#ad
Cablecc Mini PCI-E PCI Express to SATA 3.0 Dual Ports Adapter Converter Hard Drive Extension Card
#adcablecc #ad - Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, gen1x, Gen2m, Gen2i, Gen2x and Gen3i;.With hot swap and hot plug capabilities, and power management functions;. Applicable slot: mini PCI-E mSATA is not supported. Interface: 2 * sata3. 0 interface. Supports native command queue NEQ.
More information #ad
It has two sata3. 0 interfaces, 3. 0gbps, and supports transmission rates of 6. 0gbps, which can be connected to an SSD solid state hard disk as a system disk, 1. 5gbps. Main control chip: asmedia asm1061. Under high load, ncQ technology can guarantee the performance and stability of the hard disk.Brand | cablecc #ad |
Manufacturer | cablecc #ad |
Part Number | SA-033-CC |
More information #ad
8. Ziyituod
#ad
SATA Controller Expansion Card with Low Profile Bracket, Support 4 SATA 3.0 Devices, Ziyituod PCIe SATA Card, 4 Port with 4 SATA Cable, Non-Raid, Boot as System Disk
#adZiyituod #ad - Chipset - with using the asmedia1062 chip, more stable and compatible. Port multiplier FIS-based and Command-based switching supported.Compatible with windows xp /2003 / 8 / 10 / maC / 7 / NAS / Linux OS. For all pcs - with a low profile bracket and 4 SATA Cable,compatible with 99% size chassis on the market. You could make the system to boot from this sata controller but non RAID.
More information #ad
If your motherboard has raid function, you could make a RAID with this SATA Card. 4 ports adapter card - you could add 4 6gb/s SATA 3. 0 devices to your computer with this PCIe SATA card. System support - connect 4 large capacity storage devices at the same time.Brand | Ziyituod #ad |
Manufacturer | Ziyituod #ad |
Weight | 0.22 Pounds |
Part Number | ZYT-SA3014 |
Model | ZYT-SA3014 |
More information #ad
9. MHQJRH
#ad
Dual M.2 PCIE Adapter for SATA or PCIE NVMe SSD with Advanced Heat Sink Solution,M.2 SSD NVME m Key and SATA b Key 22110 2280 2260 2242 2230 to PCI-e x 4 Host Controller Expansion Card
#adMHQJRH #ad - Supports two m. 2 ssd simultaneously One SATA interface and one NVMe interface. Led power and data transfer status. Supports m.2 ssd size 2230, 2242, 2260, 2280, 22110mm. With advanced heat sink solution, PCB 24 X 5 copper hole effective ventilation heat dissipation, Including 2 heat sinks. Converts one m. 2 nvme ssd m key interface to pcie 3.
More information #ad
0 x4 interface pcie 2. 0 compatible, converts one M. 2 sata ssd b key or b+m key interface to SATA 6Gbps interface SATA cable connection required. Including both regular size and low-profile slot brackets for flexible system chassis installation. No driver installation required.Brand | MHQJRH #ad |
Manufacturer | YATENG #ad |
Height | 1 Inches |
Length | 7.3 Inches |
Width | 4.2 Inches |
Part Number | M.2 Adapter |
Model | . |
More information #ad
10. Padarsey
#ad
Padarsey 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD
#adPadarsey #ad - You can have one raid 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set. The card comes with an optional raid utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports.Add four independent sata-i ports to your pci equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.
More information #ad
Note it is pci card, NOT PCIE card. Sil3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ. Plug the sata raid pci card into the pci slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length.Brand | Padarsey #ad |
Manufacturer | Padarsey #ad |
Part Number | P-3114 |
Model | 8541586963 |
More information #ad